0434_controller_battery_data_sheet.pdf

Description
The G4BATT32 is a kit to replace a discharged memory retention battery on the Opto 22’s G4 and M4 Controllers.
The battery is designed for easy user replacement.
• Keyed Connector for Solderless Replacement • Low Self-discharge Rate Allows up to 10 Years Shelf Life Before Installation Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • Phone: (951) 695-3000 • (800) 321-OPTO • Fax: (951) 695-3095 • www.opto22.com Inside Sales: (800) 321-OPTO • Product Support: (800) TEK-OPTO • (951) 695-3080 • Fax: (951) 695-3017 • E-mail: [email protected] If installling in a G4LC32 controller, follow steps 1-4. For M4 or G4LC32SX controllers, proceed to step 4.
Remove the power supply and any communication cable connections.
Remove the four screws attaching the communications board to the controller.
Gently pull off the communications board to access the mother board.
Remove the battery connection to the mother board and replace it with the new battery.
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • Phone: (951) 695-3000 • (800) 321-OPTO • Fax: (951) 695-3095 • www.opto22.com Inside Sales: (800) 321-OPTO • Product Support: (800) TEK-OPTO • (951) 695-3080 • Fax: (951) 695-3017 • E-mail: [email protected] 1991–2001 Opto 22. All rights reserved. All trademarks, trade names, logos, and service marks referenced herein belong to their respective companies.
Products A SHEET
Opto 22 Software
Opto 22 produces a broad array of reliable, flexible hardware and Opto 22’s ioProject and FactoryFloor® software software products for industrial automation, remote monitoring, enterprise suites provide full-featured and cost-effective data acquisition, and machine-to-machine (M2M) applications.
control, HMI, and OPC software to power yourOpto 22 hardware. These software applications SNAP Ethernet Systems
help you develop control automation solutions, build Based on the Internet Protocol (IP), SNAP Ethernet systems offer easy-to-use operator interfaces, and expand your flexibility in their network connectivity and in the software applications manufacturing systems’ connectivity.
they work with. The physical network may be a wired Ethernet network, acellular wireless network, or a modem. A wide variety of software applications can exchange data with SNAP Ethernet systems, including: In delivering hardware and software solutions for worldwide device • Opto 22’s own ioProject™ suite of control and HMI software management and control, Opto 22 retains the highest commitment to • Manufacturing resource planning (MRP), enterprise management, quality. We do no statistical testing; each product is made in the U.S.A.
and is tested twice before leaving our 160,000 square-foot manufacturing facility in Temecula, California. That’s why we can guarantee solid-state relays and optically-isolated I/O modules for life.
Product Support
Opto 22’s Product Support Group offers comprehensive technical • Modbus/TCP software and hardware.
support for Opto 22 products. The staff of support engineers represents SNAP Ethernet system hardware consists of controllers and I/O units.
years of training and experience, and can assist with a variety of project Controllers provide central control and data distribution. I/O units provide implementation questions. Product support is available in English and local connection to sensors and equipment.
Spanish from Monday through Friday, 7 a.m. to 5 p.m. PST.
SNAP OEM Systems
Opto 22 Web Sites
Opto 22 SNAP OEM I/O systems are highly configurable, programmable processors intended for OEMs, IT professionals, and others who need to use custom software with Opto 22 SNAP I/O modules.
• www.internetio.com (live Internet I/O demo) Linux® applications running on these systems can read and write to analog, simple digital, and serial Other Resources
I/O points on SNAP I/O modules using easily implemented file-based operations. Applications can be developed using several common development • Hands-on customer training classes.
tools and environments, including C or C++, Java,and shell scripts.
About Opto 22
M2M Systems
Opto 22 manufactures and develops hardware and software products Machine-to-machine (M2M) systems connect your business computer for industrial automation, remote monitoring, enterprise data acquisition, systems to the machines, devices, and environments you want to monitor, and machine-to-machine (M2M) applications. Using standard, control, or collect data from. M2M systems often use wireless cellular commercially available Internet, networking, and computer technologies, communications to link remote facilities to central systems over the Internet, Opto 22’s input/output and control systems allow customers to monitor, or to provide monitoring and control capability via a cellular phone.
control, and acquire data from all of the mechanical, electrical, and Opto 22’s Nvio™ systems include everything you need for M2M— electronic assets that are key to their business operations. Opto 22’s interface and communications hardware, data service plan, and products and services support automation end users, OEMs, and Web portal—in one easy-to-use package. Visit nvio.opto22.com for information technology and operations personnel.
Founded in 1974 and with over 85 million Opto 22-connected devices deployed worldwide, the company has an established reputation forquality and reliability.
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • Phone: (951) 695-3000 • (800) 321-OPTO • Fax: (951) 695-3095 • www.opto22.com Inside Sales: (800) 321-OPTO • Product Support: (800) 22 • 43044 Business Park Drive • Temecula, CA TEK-OPTO • (951) 695-3080 • Fax: (951) 695-3017 • E-mail: sales@opto22.
92590-3614 • Phone: (951) 695-3000 • (800) 321-OPTO • Fax: (951) 695-3095 • www com Inside Sales: (800) 321-OPTO • Product Support: (800) TEK-OPTO • (951) 695-3080 • Fax: (951) 695-3017 • Email: [email protected] • Form 1335-050601 2004-2005 Opto 22. All rights reserved. All trademarks, trade names, logos, and service marks referenced herein belong to their respective companies.

Source: http://www.opto22.com.tw/dnl_docs/data_sheet/0434_Controller_Battery_data_sheet.pdf

Microsoft word - management of nausea and vomiting.doc

Management of Nausea and Vomiting Nausea and vomiting may be caused by chemotherapy, radiation therapy, cancer, electrolyte imbalance, blocked intestines (including severe constipation) or other medications. It may prevent you from eating, drinking, and other daily activities and can lead to weight loss, dehydration, depression and fears about receiving more chemotherapy or radi

Libro ponte 2012-13

BIBLIOTECA D’ISTITUTOSCUOLA MEDIA STATALE I GIARDINI DEGLI ALTRI PREMESSA Il progetto ponte ha come finalità la creazione di un collegamento fra i percorsi didattici della Scuola Elementare e l’itinerario della Scuola Media, attraverso il canale della lettura. Il romanzo scelto narra la storia di Olivier che si trasferisce in campagna per le vacanze estive e lì incontra Nina. Lei

Copyright © 2008-2018 All About Drugs