Microsoft word - cts-2020e product data
Shantou Institute of Ultrasonic Instruments Co., Ltd.
Add: 77 Jinsha Road, Shantou, Guangdong 515041, China
Tel: 86-754-88250150 Fax: 86-754-88251499
Digital Ultrasonic Flaw Detector
1~4MHz and 0.5~10MHz, highlighting advantages of high sensitivity and broadband.
Immersion detection or precision measurement can be easily achieved through the logic relation between gate A and B.
locating the peak reflection echo during testing.
Variable PRF: avoid reverberation signals during flaw detection.
Complete DAC curve function: convenient for echo evaluation.
Probe angle (K value) measuring function.
Large memory for saving up to 500 data sets, including wave forms, curves,
USB port for saving system stored data and data waveforms to a USB disk, as well as
Language selection: Chinese & English. Text message prompts during operation.
High-brightness color TFT LCD, bringing optimized effect for reading measurement.
10 waveform colors and character colors are available.
Large capacity lithium battery pack for continuous operation of over 6 hours.
Example 1: Thin plates
With good near-field resolution, the CTS-2020E is
suitable for near-field flaw detection on measured
pieces, as well as thickness measurement of
Example 2: DAC
With its complete DAC curves and echo compare
function, the CTS-2020E brings easier, more
convenient and more accurate echo analysis.
(From flaw echo of a welding line and a group of
Example 3: Tracking function
Gate B tracking function enables easy immersion
Example 4: Precision testing on flaws when using an angle probe
With powerful functions of the digital system, flaws
can be located accurately. (From the waveform ofΦ1.6, 40mm from the testing surface, with an angle probe)
0~6000 (Longitudinal wave in steel), continuously
Approx. 20 to 500Hz for display range within 1500mm
Approx. 20 to 200Hz for display range over 1500mm
Operating Frequency Range
MHz 0.5 ~10, two steps selectable: 1 ~4 /0.5~10
Vertical Linearity Error
Up to 10 echo reference points recorded, can be displayed in steps; dB distances between the three
DAC curves variable; DAC echo reference point can be inserted, or the selected echo reference point can be modified. 2 independent measure gates. Gate B can be set as
Sound & light alarm (built-in beeper and LED on the
Measure Point Selection
Flank or peak of the first echo in the gate
Display of sound path, horizontal distance, vertical
5.7” high brightness TFT LCD, 320 x 240 pixels
Two display modes selectable: normal and zoom
500 data sets, including detection state parameters,
echo figures, DAC curves, remarks, etc. Save the system internal stored data and data
waveforms to a USB disk. Print out detection reports. Compatible printers: HP-1020, HP-1120,
≥6h When using with the 7.2Ah lithium batter pack
DC 6 ~9V (external power supply); 6.0 ~8.4V (battery)
CTS-2020E Digital Ultrasonic Flaw Detector Main Unit
CD for US3020_2020 Computer Data Processing Software
【 Note 】 : For optional probes and accessories, please refer to NDT Probes and
Available online at www.sciencedirect.comPsychiatry Research 158 (2008) 306 – 315The functionality and economic costs of outpatients withI Hui Lee a,b, Po See Chen a,b, Yen Kuang Yang a,b,⁎, Yi Cheng Liao c, Yih Dar Lee a,d,Tzung Lieh Yeh a,b, Ling Ling Yeh e, Shu Hui Cheng b, Ching Lin Chu aa Department of Psychiatry, College of Medicine, National Cheng Kung University, 138 Sheng Li
Proposed Treatment for Vestibular Dysfunction in Dogs Vestibular dysfunction in the dog can be a disturbing condition for owners, as well as somewhat confounding for the veterinarian and/or physiotherapist. This condition often presents with a sudden onset, no obvious triggering incident, and a very dramatic presentation. The vestibular system is responsible for maintaining the orientation of the