Untitled-6

: Tetracycline Selective Supplement
: Chemical Identification
Name of the Product : Tetracycline Selective Supplement Produced by : 23, Vadhani Indl. Estate, LBS Marg, Mumbai 400 086, India.
: 2500 0970, 2500 1607 Fax No. 022 2500 2468 : Composition
* Harmful material
Information on Ingredients
Tetracycline
CAS No.
Sodium benzyl penicillinCAS No. : 69-57-8R : 42/43 : Hazards Identification
Hazard : Inhalation and ingestion of, or skin penetration by these substances is harmful to one‘s health.
Non-recurring, recurring or lengthy exposure to these substances may result in irreversible damage.
Caution : Avoid contact with the human body, including inhalation of the vapours and in cases ofmalaise consult a doctor.
: First - Aid Measures
In case of swallowing, wash out mouth with water provided person is conscious. In case of skin contact,flush with copious amounts of water for at least 15 minutes. Remove contaminated clothing and shoes. Incase of inhalation, remove to fresh air. If breathing becomes difficult, call physician. In case of contact witheyes, wash with copious amounts of water for at least 15 minutes. Assure adequate washing by separat-ing the eyelids with fingers. In serious conditions, call a physician, show the container or label.
: Fire Fighting Measures
Extinguishing Media. Water spray.
Carbon dioxide, dry chemical powder or appropriate foam. Special firefighting procedures. Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.
: Accidental Release Measures
Wear respirator, chemical safety goggles, rubber boots and heavy rubber gloves. Sweep up, place in a bagand hold for waste disposal. Avoid raising dust. Ventilate area and wash spill site after material pickup iscomplete.
: Handling and Storage
: Exposure Controls / Personal Protection
Wear appropriate NIOSH/MSHA-approved respirator, chemical-resistant gloves, safety goggles, otherprotective clothing. Mechanical exhaust required.
: Physical and Chemical Properties
Section 10 : Stability and Reactivity
Stability : Product is stable if stored as per the conditions specified under storage of Section No. 7.
Product loses its potency/performance above 45°C.
Conditions to avoid : Heat and light.
Hazardous polymerization will not occur.
: Toxicological Information
Acute Effects : May be harmful if swallowed.
Exposure can cause : Stomach pains, vomiting, diarrhoea. Prolonged or repeated exposure may causeallergic reactions in certain sensitive individuals.
RTECS No. : QI 8750000 For complete information RTECS may be referred.
: Ecological Information
Section 13 : Disposal Considerations
On completion of work all used or unusable preparations of this product and derivatives thereof are to bedisposed off by autoclaving and/or by incineration. Dispose off waste in accordance with all applicableFederal, State and local laws.
Section 14 : Transport Information
: Regulatory Information
Risk Phrases : Harmful if swallowedRisk Phrases : May cause sensitization by inhalation and skin contactSafety Phrases : Do not breathe dustSafety Phrases : Wear suitable protective clothing and gloves Significance of signs : Inhalation and ingestion of, or skin penetration by these substances is harmful toone‘s health. Non-recurring, recurring or lengthy exposure to these substances may result in irreversibledamage : Other Information
The information contained in this data sheet represents the best information currently available to us. How-ever, no warranty is made with respect to its completeness and we assume no liability resulting from itsuse. The information is offered solely for users‘ obligation to investigate and determine the suitability of theinformation for their particular purpose.

Source: http://himediadownloads.com/MSDS/FD196.pdf